#Victron bluetooth battery monitor generator#
#Victron bluetooth battery monitor update#

The essential function of the Victron battery monitor BMV-712 Smart is to calculate ampere hours consumed and the state of charge of a battery. Additional input for measuring voltage (from a second battery), temperature or mid-point voltage and corresponding alarm and relay settings.Victron Energy BMV-712 Smart Battery Monitor High current measurement resolution: 10 mA (0.01A) Stores a wide range of historical data that can be used to assess usage patterns and battery condition Selection of shunt capacity up to 10,000 amps 500 amp quick connect shunt and connection kit

#Victron bluetooth battery monitor generator#

Programmable relay, to disconnect non-critical loads or to start a generator if necessary. Remaining autonomy at current discharge rate.

Voltage, current, power, ampere-hours consumed and state of charge of the battery Other BMV-712 Smart Victron Battery Monitor functions Prevents the current drain from increasing in the event of an alarm. A residual current of 10mA, for example, can damage a 200 Ah battery if the system is left in a discharged state for more than 8 days.

The battery will be damaged if the remaining reserve capacity of the battery is removed. In particular, Li-Ion batteries are virtually depleted of their capacity when they are discharged to the low-voltage cut-off level.Īfter low voltage disconnection of the cells, the reserve capacity of a Li-ion battery is approximately 1Ah per 100Ah capacity. Power consumption: 0.7Ah per month (1mA) 12V and 0.6Ah per month (0.8mA) 24V Corrective action taken after a mid-point voltage alarm can prevent possible damage to a battery. Significant or increasing deviations from the mid-point voltage indicate improper maintenance or failure of a battery or cell. However, in practice, deviations will be seen depending on many factors, such as the different state of charge of new batteries or cells, their different temperatures, internal leakage currents, capacities and much more. Ideally, the mid-point voltage would be exactly half of the total voltage. The midpoint tension is the tension obtained in the middle of this chain. A battery bank consists of a string of cells connected in series. With the Victron BMV-712 Smart Battery Monitor we can monitor this parameter for a much lower cost. This function is generally used to monitor large battery banks at a high cost. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m) no more required.Īlso included is a front screen trim plate, square or round, a rear fixing ring and screws for front mounting. The shunt is connected to the monitor via a standard RJ12 telephone cable. Easy to install:Īll electrical connections are made to the power shunt's quick connect PCB.

#Victron bluetooth battery monitor update#

update the software as new functions are added. to consult all important data on a single screen, Use your smartphone or other Bluetooth-enabled device to: Thanks to the fact that most of the other products from Victron Energy have integrated Bluetooth, wireless communication between them simplifies the installation of systems and improves their performance.

With integrated Bluetooth connectivity, the BMV-712 Smart Battery Monitor is ready for the era of the Internet of Things. BMV-712 Smart Victron Battery Monitor Integrated Bluetooth